Allied Telesis AT-2972T/2 - Manual (Page 29)

Advanced Control Suite User’s Guide
29
frames is disabled.
– LSO Off, Jumbo 3000. The Jumbo frame size allowed is 3000
bytes and LSO is off.
– LSO Off, Jumbo 4500. The Jumbo frame size allowed is 4500
bytes and LSO is off.
– LSO Off, Jumbo 6000. The Jumbo frame size allowed is 6000
bytes and LSO is off.
– LSO Off, Jumbo 7500. The Jumbo frame size allowed is 7500
bytes and LSO is off.
– LSO Off, Jumbo 9000. The Jumbo frame size allowed is 9000
bytes and LSO is off.
ˆ Locally Administered Address. The Locally Administered Address is
a user-defined MAC address that is used in place of the MAC address
originally assigned to the network adapter. Every adapter in the
network must have its own unique MAC address. This locally
administered address consists of a 12-digit hexadecimal number.
– Value. Assigns a unique node address for the adapter.
– Not Present (Default). Uses the factory-assigned node address on
the adapter.
The appropriate assigned ranges and exceptions for the locally
administered address include the following:
* The range is 0000 0000 0001 to FFFF FFFF FFFD.
* Do not use a multicast address (least significant bit of the high
byte = 1).
* Do not use all 0s or all F's.
ˆ Speed & Duplex. The Speed & Duplex property sets the connection
speed and mode to that of the network. Note that Full-Duplex mode
allows the adapter to transmit and receive network data
simultaneously.
Note
This parameter is available only for copper devices and is not
displayed for the AT-29xxSX Series adapters.
– 10 Mb Full. Sets the speed at 10 Mbit/s and the mode to Full-
Duplex.
– 10 Mb Half. Sets the speed at 10 Mbit/s and the mode to Half-