Allied Telesis AT-S63 - Manual (Page 156)

Chapter 11: SNMPv3
156 Section III: SNMPv3
Configuring the SNMPv3 Notify Table
Here are the procedures for managing the SNMPv3 Notify Table:
ˆ “Creating a Notify Table Entry” on page 156
ˆ “Deleting a Notify Table Entry” on page 158
ˆ “Modifying a Notify Table Entry” on page 158
Creating a Notify
Table Entry
To create an entry in the SNMPv3 Notify Table:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 52.
3. In the SNMPv3 section, click the radio button for Configure Notify
Table, and the Configure button to display the SNMPv3 Notify Table
tab, shown in Figure 50.
Figure 50. SNMPv3 Notify Table Tab
4. Click the Add button to display the Add New SNMPv3 Notify page in
Figure 51.