Allied Telesis AT-S63 - Manual (Page 105)

AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section II: Advanced Operations 105
8. Click the Apply button.
If you selected the Config option in step 6, the master switch, after
receiving the new file from the TFTP server, stores it in its file system
and marks it as its new active configuration file. It then displays a
message on your screen when it is ready to reset the stack. When you
see the prompt, click OK to initiate the reset and the discovery
process.
If you selected the File option, the master switch simply stores the file
in its file system, without marking it as its new active configuration file.
For instructions on how to manually designate the file as the active file
on the stack, refer to “Selecting the Active Boot Configuration File” on
page 99.