Allied Telesis AT-S63 - Manual (Page 109)

AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section II: Advanced Operations 109
3. In the Log Settings section, click Enabled for the Status to enable the
event logs, or Disabled to disable the event logs and to stop the
master switch from storing events in the event log. The default setting
is enabled.
4. Click Apply to activate the settings on the switch.
If you enabled the logs, the switch immediately begins to add events to
the logs.
5. To save your changes in the master configuration file on the master
switch, click the Save Config button in the Configuration menu.