Stack leds, Figure 11. stack leds, Table 7. stack leds – Allied Telesis x600-48Ts/XP User Manual
Page 32
Chapter 1: Overview
32
Stack LEDs
The STACK LEDs reflect the status of the two Stack ports on the
AT-StackXG Stacking Module. To locate the Stack LEDs, see Figure 11.
Figure 11. Stack LEDs
These LEDs remain off if the module is not installed. See Table 6 for a
description of the STACK LEDs.
Table 6. STACK LEDs
LED
State
Description
MSTR
Off
The switch is not part of a stack or is a member
unit of the stack.
Green
The switch is the master unit of the stack.
1 L/A
Off
Stack Port 1 has not established a link to a
stacking port on another AT-StackXG Stacking
Module.
Green
Stack Port 1 has established a link to a
stacking port on another AT-StackXG Stacking
Module.
Flashing
Green
Stack Port 1 has established a link to a
stacking port on another AT-StackXG Stacking
Module and is sending or receiving packet
traffic.
1313
L/A
50
XFP
LINK / ACT
STATUS
FAULT
MASTER
RPS
PWR
PRES
MSTR
L/A
L/A
1
2
STACK
CONSOLE
x600-48Ts/XP
BUSY
READY
FAULT
SD
RESET
Layer 3 Gigabit Ethernet Switch