Allied Telesis AT-2812FX - Manual (Page 80)

Appendix B: Cleaning Fiber Optic Connectors
80
Using a Swab
Specially treated swabs (stick cleaners) are available for cleaning inside
connector adapters or hard-to-reach ferrule tips. These swabs, often
referred to as “lint free” or “alcohol free” swabs, are available from many
vendors, as shown in Figure 36. Stick cleaners are available in both 2.5
mm and 1.25 mm sizes for use on SC and MU connectors respectively.
Note
NEVER use a household cotton swab and/or alcohol to clean a fiber
optic connector. This may leave a residue on the ferrule tip.
Figure 36. Lint-Free and Alcohol-Free Swabs
Note
Do not use compressed air or aerosol air to clean a fiber optic
connector.
To clean a recessed ferrule using a swab, do the following.
1. Insert the swab into the adapter as shown in Figure 35 and rub the
ferrule tip with the swab.
Figure 37. Cleaning a Recessed Ferrule
2. If desired, repeat step 1.
157