Allied Telesis AT-GS900/8 - Manual (Page 21)

AT-GS900/8 Gigabit eco-friendly Ethernet Switches Installation Guide
21
eco-friendly
Switch
The eco-friendly switch on the front panel is shown in Figure 3. It may be
used to enable all the port LEDs (out position) or conserve power by
disabling the port LEDs (in position). The switch functions are described in
Table 2.
Figure 3. eco-friendly Switch
LEDs
The system and port LEDs on the front panel of the AT-GS900/8 switch
displays the switch and its port status information. See Figure 4. Each port
has two LEDs.
Figure 4. Port LEDs
POW
Table 2. eco-friendly Switch Functions
Action Results
Off (Out position) All front panel LEDs are enabled.
On (In position)
All front panel LEDs are disabled for power
conservation with the exception of the POWER LED,
which remains active at all times.
1906
1 2 3 4 5 6 7 8 POWER