Allied Telesis AT-2814FX - Manual (Page 85)

AT-2814FX Fast Ethernet Fiber (SC) ExpressCard Installation and User’s Guide
85
Cleaning Fiber Optic Connector Using a Swab
Specially treated swabs (stick cleaners) are available for cleaning inside
connector adapters or hard-to-reach ferrule tips. These swabs, often
referred to as “lint free” or “alcohol free” swabs, are available from many
vendors. Stick cleaners are available in both 2.5 mm and 1.25 mm sizes
for use on SC and MU connectors respectively. See Figure 45.
Note
NEVER use a household cotton swab and/or alcohol to clean a fiber
optic connector. This may leave a residue on the ferrule tip.
Figure 45. Lint-Free and Alcohol-Free Swabs
Note
Do not use compressed air or aerosol air to clean a fiber optic
connector.
To clean a recessed ferrule using a swab, do the following.
1. Insert the swab into the adapter as shown in Figure 44 and rub the
ferrule tip with the swab.
Figure 46. Cleaning a Recessed Ferrule
2. If needed, repeat step 1.