Allied Telesis AT-2814FX - Manual (Page 50)

Chapter 4: Modifying Advanced Properties
50
Flow Control
The Flow Control feature allows you to control the flow between the AT-
2814FX ExpressCard and the link partner. You can enable or disable this
feature to process received pause frames and transmit pause frames.
To enable or disable the Flow Control feature, do the following:
1. Access the Device Manger on your operating system.
See “Starting the Device Manager” on page 43.
2. Click the Advanced tab.
The Advanced page is displayed. See Figure 21 on page 46.
3. Select Flow Control in the Property box.
4. Click on the  in the Value box.
The options are displayed as shown in Figure 26.
Figure 26. Flow Control Page
5. Select one of the following options:
 Disabled— The AT-2814FX ExpressCard ignores PAUSE frames.