Allied Telesis AT-2814FX - Manual (Page 36)

Chapter 3: Installing the Hardware
36
Figure 14. Attaching the Stabilizer to the AT-2814FX ExpressCard
6. Applying even pressure at both corners of the ExpressCard, push the
card until it is firmly seated in the PCI ExpressCard slot. Figure 15
shows how to insert the card in the 54mm slot.
The ExpressCard fits snugly into the slot.
Figure 15. Inserting the Unit into the 54mm Slot
Caution
Do not use excessive force when seating the card. Applying excess
force may damage the system or the card. If the card resists seating,
remove it from the system, realign it, and try again.