Allied Telesis AT-2814FX - Manual (Page 33)

AT-2814FX Fast Ethernet Fiber (SC) ExpressCard Installation and User’s Guide
33
Installing the AT-2814FX ExpressCard
The following instructions describe how to install the AT-2814FX
ExpressCard in a laptop computer equipped with a 34 mm or 54 mm PCI
ExpressCard interface slot. The installation illustrations in this manual use
the 54 mm interface because it is the more common interface for laptop
computers.
For additional information about installing an PCI ExpressCard on your
particular laptop, refer to the manual that was supplied with your laptop.
Note
To perform the following procedure, you need to supply a pen.
To install an AT-2814FX ExpressCard, do the following:
1. Review the “Pre-Installation Checklist” on page 32 and “Reviewing
Safety Precautions” on page 30.
Note
Allied Telesis recommends that you turn off your laptop computer
and unplug from the power outlet before installing the AT-2814FX
ExpressCard.
2. Select the 34 mm or 54 mm ExpressCard slot.
See Figure 10 on page 34 for an example of the 54 mm ExpressCard
slot.
Note
If you do not know how to identify a PCI ExpressCard slot, refer to
your laptop documentation.