Allied Telesis AT-2814FX - Manual (Page 56)

Chapter 4: Modifying Advanced Properties
56
Large Send Offload (IPv4)
The Large Send Offload feature for IPv4 traffic allows you to control the
load of sending out large packets. When this feature is enabled, the AT-
2814FX ExpressCard segments large packets and reduces the CPU load.
To enable or disable the Large Send Offload (IPv4) feature, do the
following:
1. Access the Device Manger on your operating system.
See “Starting the Device Manager” on page 43.
to start the Device Manager on your system.
2. Click the Advanced tab.
The Advanced page is displayed. See Figure 21 on page 46.
3. Select Large Send Offload (IPv4) in the Property box.
4. Click on the  in the Value box.
The options are displayed as shown in Figure 29.
Figure 29. Large Send Offload (IPv4) Page