Allied Telesis AT-IFS802SP/POE - Manual (Page 86)

82 AT-IFS802SP/POE(W)-80 User Manual
bandwidth out [Value]
Set interface output
bandwidth. Rate Range is
from 100 kbps to 102400
kbps or to 256000 kbps for
giga ports and zero means
no limit.
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth out 100
show bandwidth I
Show interfaces bandwidth
control switch(config)#interface fastEthernet 2
switch(config-if)#show bandwidth
State [Enable |
Disable]
I
Use the state interface
configuration command
to specify the state mode
of operation for Ethernet
ports. Use the disable form
of this command to disable
the port.
switch(config)#interface fastEthernet 2
switch(config-if)#state Disable
show interface
configuration
I
show interface configuration
status
switch(config)#interface fastEthernet 2
switch(config-if)#show interface
configuration
show interface status I show interface actual status
switch(config)#interface fastEthernet 2
switch(config-if)#show interface status
show interface
accounting
I
show interface statistic
counter switch(config)#interface fastEthernet 2
switch(config-if)#show interface accounting
no accounting I
Clear interface accounting
information switch(config)#interface fastEthernet 2
switch(config-if)#no accounting