17 rate limiting – Allied Telesis AT-IFS802SP/POE User Manual

Page 53

AT-IFS802SP/POE(W)-80 User Manual

6.17 Rate Limiting

You can set up every port’s bandwidth rate and frame limitation type.

Ingress Limit Frame type

•

: select the frame type that wants to filter. There are four frame types

for selecting:

All
Broadcast/Multicast/Flooded Unicast
Broadcast/Multicast
Broadcast only
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Broadcast only types
are only for ingress frames. The egress rate only supports

All type.

>
>
>
>

Rate Limiting interface

All the ports support port ingress and egress rate control. For example, assume port 1 is 10Mbps,

•

users can set it’s effective egress rate is 1Mbps, ingress rate is 500Kbps. The switch performs the
ingress rate by packet counter to meet the specified rate

Ingress: Enter the port effective ingress rate (The default value is “0”).
Egress: Enter the port effective egress rate (The default value is “0”).

And then, click to apply the settings

•

>
>

Apply