Allied Telesis SwitchBlade x8100 Series - Manual (Page 17)

SwitchBlade x8100 Series System Overview | 17
SwitchBlade x8100 Series | System Overview
System information
Once the SwitchBlade x8100 chassis has successfully booted, information about the system is available from the command line. For
example, ‘show system’ and ‘show card’ provide an overview of hardware installed and its status.
awplus# show system
Switch System Status Fri Mar 30 02:44:10 2012
Board ID Bay Board Name Rev Serial number
-------------------------------------------------------------------------------------------------------------------------------------------
Chassis
315 AT-SwitchBlade x8112 E-0 A042764112500070
Blade 317 Bay1 AT-SBx81GP24 D-0 A042774112800031
Blade 353 Bay2 AT-SBx81XS6 X8-0 A045624113500003
Blade 317 Bay3 AT-SBx81GP24 D-0 A042774112700005
Controller 316 Bay5 AT-SBx81CFC400 F-0 A042854111300027
Controller 316 Bay6 AT-SBx81CFC400 F-0 A042854111300029
Blade 352 Bay7 AT-SBx81GS24a C-1 A042824112400004
Blade 351 Bay11 AT-SBx81GT24 B-1 A044024110900001
Blade 352 Bay12 AT-SBx81GS24a C-1 A042824104600004
PSU 319 PSUA AT-SBxPWR-SYS/AC A-0 -
Fan module 321 FAN1 T-SBxFAN12 E-0 A042844112400016
-------------------------------------------------------------------------------------------------------------------------------------------
RAM: Total: 513436 kB Free: 365932 kB
Flash: 126.0MB Used: 121.2MB Available: 4.8MB
-------------------------------------------------------------------------------------------------------------------------------------------
Environment Status : Normal
Uptime : 0 days 00:03:26
Bootloader version : 2.0.7-devel
Current software : SBx8100-5.4.2.rel
Software version : 5.4.2
Build date : Fri Mar 30 14:53:19 NZDT 2012
Current boot config: flash:/default.cfg (file exists)
User Configured Territory: usa
System Name
awplus
System Contact