Chapter 28, Rebooting the at-gs950/16ps – Allied Telesis AT-GS950/16PS User Manual
Page 337
337
Chapter 28
Rebooting the AT-GS950/16PS
This chapter provides the procedures for rebooting the AT-GS950/16PS
switch by using the Normal reboot function provided in the AT-S112
management software.
Note
Alternately, you can reboot the AT-GS950/16PS switch by pressing
the front panel eco-friendly switch between 5 to 9 seconds.
In addition to rebooting the switch in the AT-S112 management software,
you have the option to reset the configuration parameters on the switch to
the original factory default settings. There are two ways to accomplish this:
Press the front panel ecofriendly button for more than
10 seconds and release it.
Reboot the switch in the AT-S112 management
software and follow the procedures to reset to factory
defaults.
Note
Refer to the AT-GS950 Installation guide for more information about
how to use the eco-friendly button to reboot or reset the switch.
Note
The AT-S112 Management software default values are listed in “AT-
GS950/8 Default Parameters” on page 347.
The following procedures are included in this chapter:
“Configure Factory Default Values” on page 340