AFX CNP140027LSNPWH - Manual (Page 2)

CENTRE LED PENDANTS
Models: CNP1400 Series
2 of 2
Limited Factory Warranty
AFX Lighting warrants this fixture is free from defects in materials and workmanship when installed and used under normal ope
date of purchase. This warranty covers all component pa
installation, misuse, mishandling or damage incurred in transit
3. Mounting
A. Make sure all six pulley
the same length. If any length adjustment
free hanging on the cables. Push the
even the cable length. The cables are pulled by the weight of the balance (5) until the
all the same length.
B. Align the canopy (4) open slots with
Install the fixture by inserting
(4) open slots and turning canopy clockwise. Tighten
4. Shade Installation.
A. Thread in the glass shade (9)
conical shade style is shown, all shade style have the same thread.
5. Restore power at fuse or circuit breaker box.
6. Replacement of LED Module.
A. Remove Diffuser (9) by turning it counter clockwise
B. Hold the housing (7) and turn
counter clockwise to remove it.
C. Insert new LED lamp into the lamp socket
housing (5) and turn it clockwise until
D. Re-attached glass diffuser.
CENTRE LED PENDANTS
CNP1400 Series
AFX Lighting warrants this fixture is free from defects in materials and workmanship when installed and used under normal ope
date of purchase. This warranty covers all component parts and extends only to replacement of defective fixture or components; it does not cover failure due to improper
installation, misuse, mishandling or damage incurred in transit
pulley cables (6) between the canopy (4) and the
f any length adjustment is needed, hold the fixture so the balance will be
free hanging on the cables. Push the adjustment knob (11)
he cables are pulled by the weight of the balance (5) until the
Align the canopy (4) open slots with two gem bar screws (3)
Install the fixture by inserting the head of the screws thru the
and turning canopy clockwise. Tighten the screws
A. Thread in the glass shade (9) metal insert into the lamp holder (7) and tighten it.
conical shade style is shown, all shade style have the same thread.
Restore power at fuse or circuit breaker box.
of LED Module.
emove Diffuser (9) by turning it counter clockwise.
and turn LED module (6)
counter clockwise to remove it.
Insert new LED lamp into the lamp socket located in the
5) and turn it clockwise until the lamp snaps in pla
attached glass diffuser.
LED Pendant Fixtures
120VAC / 60Hz
AFX Lighting warrants this fixture is free from defects in materials and workmanship when installed and used under normal operating conditions for a period of 3 years from
rts and extends only to replacement of defective fixture or components; it does not cover failure due to improper
between the canopy (4) and the balance (5) are all
hold the fixture so the balance will be
in the direction of the arrow to
he cables are pulled by the weight of the balance (5) until they are
gem bar screws (3).
the canopy
screws.
metal insert into the lamp holder (7) and tighten it. The
conical shade style is shown, all shade style have the same thread.
located in the
place.
LED Pendant Fixtures
8060743 R0
rating conditions for a period of 3 years from
rts and extends only to replacement of defective fixture or components; it does not cover failure due to improper