Setting visual alerting, Personal ringing options – Avaya 4610SW User Manual
Page 56
4610SW IP Telephone Options
56 4610SW IP Telephone User Guide
Setting Visual Alerting
When this option is set to No (the default), ringing is the only notification of an incoming call.
When set to Yes, your phone rings and your voice message indicator light flashes to alert you to
an incoming call.
1. To change this option, press the corresponding Line/Feature button.
2. Press the Line/Feature button for the next setting you want to change or save this setting by
pressing the Save softkey. (To restore the previous setting without changing it, press the
Cancel softkey.)
Upon saving or cancelling, the first Options Main screen displays.
Personal Ringing Options
Your 4610SW IP Telephone has eight ringing pattern options. You can hear the patterns and
select the one you prefer using the Personal Ringing option.
1. Select Personal Ringing from the fourth Options Main screen.
The Personal Ringing screen #1 displays the first four ring patterns.
2. To hear any of the first four ring patterns, press the Line/Feature button to the left or right of
any numbered pattern. To hear additional ring patterns, proceed to Step
.
The Current Pattern number changes to the selected pattern, which rings once.
3. To display the second Personal Ringing screen and hear the remaining four ring patterns,
use the Page Right or Page Left Indicator buttons to display the second screen. To hear
any of these ring patterns, press the Line/Feature button to the left or right of any numbered
pattern.
The Current Pattern number changes to the selected pattern, which rings once.
4. Repeat Step
until you hear your preferred ring pattern.
5. Save the new ring pattern by pressing the Save softkey. To restore the previous setting
without making a change, press the Cancel softkey.
The fourth Options Main screen displays.
Note:
Note:
Going off-hook, receiving a call, or losing power during ring pattern selection
interrupts the process, and you must start over from Step
Adjust the ringer volume using the Volume Control buttons, covered in