Samsung RF34H9960S4-AA - Manual (Page 53)

English - 53
TROUBLESHOOTING
The sparkling
water suddenly
stops being
dispensed even
though the
operation is still in
progress. • Check if the short lines inside the cup icon are turning on one by one
in a clockwise direction. This indicates that the sparkling water is being
produced. When production is complete, all of the short lines inside
the cup icon turn on. When production is complete, the refrigerator will
dispense sparkling water.
• If the refrigerator is not dispensing sparkling water, check if “OFF” is
displayed above the cup icon over the Sparkling Maker button.
• This indicates that the sparkling water tank is empty and the automatic
sparkling water production function is turned off. To produce sparkling
water, touch and hold the “Sparkling Maker” button for 3 seconds to start
production.
The Sparkling
function is turned
off but sparkling
water continues to
be dispensed. • Even if you turn off the sparkling water production function, sparkling
water is dispensed for as long as there is sparkling water in the sparkling
water tank.
• If you do not use the sparkling water maker for an extended period of
time, stop the automatic sparkling water production function and remove
the sparkling water through the dispenser.
The sparkling
water dispenses at
a slower rate than
regular water. • Check if the tap water valve is closed or the hose is bent and if water
is being supplied to your home at the normal pressure. If the tap water
pressure is too low, the sparkling water maker may not work properly
because too little water is being supplied to the sparkling water tank.
• When water is supplied to the sparkling water tank from a water purifi er,
sparkling water may not be produced properly because too much water
is required over a short period of time. We recommend that you do not
dispense water from a water purifi er less than fi ve minutes before you start
a sparkling water production cycle.
• If this problem continues, please contact the water purifi er manufacturer
or ask a plumber to increase the tap water pressure to a normal level.
The sparkling
water is not cold
enough and tastes
fl at. • If you continuously produce a lot of sparkling water, you may not be able
to enjoy the true taste of sparkling water because there is too little time to
cool the water. To drink sparkling water at its optimal state, you have to
ensure suffi cient cooling time before you dispense sparkling water.
• We recommend you wait at least four hours after connecting tap water to
the refrigerator before making and dispensing sparkling water.
The sparkling
“OFF” icon is
displayed, but the
sparkling water
maker is not turned
off. • Check if the short lines inside the cup icon are turning on one by one in a
clockwise direction. This indicates that sparkling water is being produced
and cannot be stopped immediately. However, if you press and hold
the “Sparkling Maker” button for 3 seconds during production, then the
“OFF” icon is displayed over the cup icon and automatic sparkling water
production will turn off after the current production cycle is complete.
The concentration
control function
is disabled during
sparkling water
production. • Check if the short lines inside the cup icon are turning on one by one
in a clockwise direction. This indicates that the sparkling water is being
produced. Since the sparkling water concentration cannot be changed
during a production operation, change the concentration level when
production is complete and the blinking stops. The refrigerator applies the
new Sparkling Level to the next production operation.
DA68-03013A-05.indb 53 DA68-03013A-05.indb 53 2014. 5. 28. 10:09 2014. 5. 28. 10:09