Samsung RF34H9960S4-AA - Manual (Page 24)

English - 24
( 3 ) Chef Pantry
Chef
Pantry
Chef pantry will change to Fish/Meat or
Fridge Mode automatically depending
on the set fridge temperature.
The Fish/Meat Mode lets you store
fi sh and meat at its freshest for a short
period of time.
To store fi sh or meat for longer, put it
into the Cool Select Room and select
the “Freezer” or “Soft Freeze” functions.
• If you set the fridge temperature to
34~36 °F, the Chef Pantry changes
to Fish/Meat Mode and the Fish/
Meat icon lights.
The Chef Pantry is set to 30 °F
(-1 °C) in the Fish/Meat mode.
• If you set the fridge temperature to
37~44 °F, the Chef Pantry changes
to Fridge Mode and the Fridge Icon
turns on.
( 4 )
CoolSelect
(Hold 3 sec for Reset Filter)
• The CoolSelect button lets you set
the Cool Select Room on the bottom
right of your refrigerator to one of
four settings: Freezer, Soft Freezing,
Chill, or Cool.
• To reset the water fi lter life indicator.
After you replace the water fi lter,
touch and hold this button for 3
seconds to reset the water fi lter life
indicator.
Freezer
Touch Freezer to set the Cool Select
Room to the same temperature as the
freezer.
• Use this setting to keep frozen food
fresh.
Soft
Freeze
• Touch Soft Freeze to set the
temperature in the Cool Select
Room to 23 °F (-5 °C) .This feature
helps keep meat and fi sh fresh
longer.
Chill
• Touch Chill to set the temperature
of the Cool Select Room to 30 °F
(-1 °C).
Cool
• Touch Cool to set the temperature
of the Cool Select Room to 41 °F
(5 °C). You can keep water, juice,
soft drinks, beer, etc. cold.
Filter
Water fi lter usage
This icon lights when you need
to change the fi lter, usually after the
refrigerator has dispensed about 300
gallons of water (after about 6 months).
After you install the new water fi lter,
reset the fi lter indicator by touching and
holding the CoolSelect/hold 3 sec for
Filter Reset button for 3 seconds.
• If water is not dispensing or
dispensing slowly, you need to
replace the water fi lter because the
water fi lter is clogged.
• Some areas have large amounts of
lime in their water, which causes the
water fi lter to clog more quickly.
( 5 )
Energy Saving
(Hold 3 sec for °C↔°F)
Energy
Saving
Touching this button turns Energy
Saving mode on and off. When you turn
Energy Saving on, the Energy Saving
icon lights.
Turn Energy Saving off and the icon
goes off. The Energy Saving function is
set to “ON” in the factory.
If condensation or water drops appear
on the doors, turn the Energy Saving
mode off.
Touch and hold this button for 3
seconds to switch the temperature
units between °C and °F.
DA68-03013A-05.indb 24 DA68-03013A-05.indb 24 2014. 5. 28. 10:08 2014. 5. 28. 10:08