American Power Conversion XR - Manual (Page 35)

990-1599B Smart-UPS® VT 10-30 kVA, 208/220 V and XR Battery Enclosure Operation Manual 27
Network Management Card with
Environmental Monitor
The APC Network Management Card with Environmental Monitor (AP9619) is installed in the UPS
as default. It is used for remote system control and monitoring, e-mail notifications etc.
Network Management Card replacement
 Loosen the 2 torx screws (one each side of the card).
 Carefully pull out the card.
Reversed procedures for installation.
For configuration and use, refer to the separate user manual - Network Management
Card with Environmental Monitor - shipped with the UPS.
10/100Base-T Probe
AP9619 Network Management Card EM
!
Reset
Output Pwr Zone
10/100
Model: Serial: BATTERY UNIT Model: Serial: BATTERY UNIT Model: Serial: BATTERY UNIT Model: Serial: BATTERY UNIT
Model: Serial: BATTERY UNIT Model: Serial: BATTERY UNIT Model: Serial: BATTERY UNIT Model: Serial: BATTERY UNIT
10/100Base-T Probe
AP9619 Network Management Card EM
!
Reset
Output Pwr Zone
10/100

