American Power Conversion XR - Manual (Page 23)

Operation – Navigation
990-1599B Smart-UPS® VT 10-30 kVA, 208/220 V and XR Battery Enclosure Operation Manual 15
From the Beeper Setup Menu, select Beeper Setup.
To change the beeper setup, select Beep at and press ENTER. You now have the following options:
• Never: If you select this setting, the Beeper will be active at internal UPS errors only.
• PwrFail+30: If you select this setting, the Beeper will be active at Internal UPS errors and at
main or bypass errors. The Beeper will only sound if the fault has been present for more than 30
seconds.
• PwrFail: If you select this setting, the Beeper will be active at Internal UPS errors and at main
or bypass errors. The Beeper will sound immediately the error is occurring.
• Low Batt: If you select this setting, the Beeper will be active at internal UPS errors and at main
or bypass errors and at power failures and at low battery level (if the UPS runs in battery
operation).
Press ENTER to confirm your setting, or ESC to cancel.
Vol:
The default setting is low. This setting can be changed to medium, high, or Off. Press ENTER to
confirm your setting, or ESC to cancel.
Key Click:
The default Key Click function is set to Off. Select On if you want to change this setting to On. Press
ENTER to confirm your setting, or ESC to cancel.
Press ESC to return to previous screen.