The display, Introduction – American Power Conversion XR User Manual
Page 16
8
Smart-UPS® VT 10-30 kVA, 208/220 V and XR Battery Enclosure Operation Manual 990-1599B
The Display
Introduction
CAUTION!
The display provides access to more functions than described in this manual. Those
functions should not be accessed without the assistance of APC Customer Support in
order to avoid unwanted load impacts. For APC World-wide Customer Support, refer to
rear cover of this manual.
LOAD ON
When the green LED is on, the UPS provides power to the load equipment.
ON BATT
When the yellow LED is on, power to the load flows from the batteries to the
Power Module.
BYPASS
When the yellow LED is on, power to the load is supplied through the static
bypass switch or mechanical bypass.
FAULT
When the red LED is on, a fault condition exists.
LCD Screen
Displays alarms, status data, instructional help, and configuration items.
UP and DOWN
navigation keys
Selects menu items and accesses information.
HELP key
Launches context-sensitive help.
ENTER key
Opens menu items and input changes to system parameters.
ESC key
Returns to previous screen displayed.
?
ESC
Chrg 100%
Load 000%
120Vin 000Vout 60Hz
Runtime: 00hr 30m
LOAD ON
ON BATT
BYPASS
FAULT
Four Light Emitting Diode (LED)
indicators report the operational
status of the UPS.
Liquid Crystal
Display (LCD)
Screen
Five navigation keys are used to select
and open menu items, to access
information, change system parameters,
and to launch context-sensitive help.