Samsung SGH-A127WRAATT - Manual (Page 73)

Changing Your Settings 70
Reset Settings
Note: You can select a network other than your home network only if there is a valid roaming agreement
between the two.
To indicate to automatically or manually select the network to be used when
roaming:
1. From the Network Services menu screen, select Network Selection.
2. Press the Up or Down key until the appropriate option highlights, then
press the OK soft key or the key.
If you select Automatic, you are connected to the first available network
when roaming.
If you select Manual, go to step 3.
3. Press the Up or Down key until the network you want highlights and then
press the OK soft key or the key.
The phone will scan for that network and you will be connected.
Caller ID
You can prevent your phone number from being displayed on the phone of the
person being called.
Note: Some networks do not allow you to change this setting.
The following options are available:
• Set by Network: the default setting provided by the network is used.
• Hide Number: your number does not display on the other person’s phone.
• Show Number: your number is sent each time you make a call.
Press the Select soft key to apply changes.
Reset Settings
You can easily reset your phone to its default settings. To reset your phone:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and highlight Reset Settings. Press the Select soft key or
the key.
3. In some cases, you will be prompted to enter your password. Enter and
press the OK soft key.
All settings are reset to default settings.