Samsung BD-HM57C-ZA - Manual (Page 17)

17
2. Enter the old PIN. If you never changed
the PIN, enter the default PIN: 0000.
The Enter new PIN screen appears.
3. Enter the new PIN in the Enter new PIN
fields.
4. Re-enter the new PIN in the Confirm
new PIN fields. The "PIN is changed
successfully." message appears.
5. Press the v button
If you forget your password
1. Remove any discs.
2. Press and hold the ■ button on the
front panel for 5 seconds or more.
All settings will revert to the factory
settings.
✎ NOTES
■
When the factory default settings
are restored, all the user stored BD
data will be deleted.
General Settings
Time Zone
Lets you specify the time zone that is
applicable to your area.
Support Settings
Software Upgrade
The Software Upgrade menu allows
you to upgrade the player’s software for
performance improvements or additional
services.
By Online
To upgrade By Online, follow these steps:
1. Remove any discs from the player.
2. In the player’s menu, go to Settings >
Support > Software Upgrade.
3. Select By Online, and then press the
v button. The Connecting to Server
message appears.
4. A popup message will appear if an
update is available.
5. If a download is available, select yes.
The download and upgrade process
starts (Important : Never turn the player
off or on manually during an upgrade.)
6. When the update is complete, the
player will restart automatically.
✎ NOTES
■
The upgrade is complete when the
player turns off, and then turns on
again by itself.
■
Never turn the player off or back on
manually during the update process.
■
Samsung Electronics takes no legal
responsibility for player malfunction
caused by an unstable Internet
connection or consumer negligence
during a software upgrade.
■
No disc should be in the product when
you upgrade the software By Online.
By USB
To upgrade by USB, follow these steps:
1. Visit www.samsung.com/
bluraysupport.
2. Download the latest USB software
upgrade zip archive to your computer.
3. Unzip the zip archive to your computer.
You should have a single RUF file with
the same name as the zip file.
4. Copy the RUF file to a USB flash drive.
5. Make sure there is no disc in the player,
and then insert the USB flash drive into
the USB port of the player.
6. In the player’s menu, go to Settings >
Support > Software Upgrade.
7. Select By USB.
✎ NOTES
■
No disc should be in the product
when you upgrade the software using
the USB Host jack.
■
When the software upgrade is done,
check the software details in the
software Upgrade menu.
■
Do not turn off the player during the
software upgrade. It may cause the
player to malfunction.
■
Software upgrades using the USB
Host jack must be performed with a
USB flash memory stick only.
Auto Upgrade Notification
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version is
available for the player.
To set Auto Upgrade Notification on,
follow these steps:
1. Select Auto Upgrade Notification, and
then press the v button.
2. Use the ▲▼ buttons to select On, and
then press the v button.
If there is a new software version available,
the player notifies you with a popup
message.
1. To upgrade the firmware, remove any
discs from the player.
2. Select yes in the Pop-up. The player
turns off automatically, then restarts,
and begins the download. (Never turn
the player on or off manually during an
upgrade.)
3. The update progress popup appears.
4. When the update is complete, the
player will restart automatically.
✎ NOTES
■
The upgrade is complete when the
player turns off, and then turns on
again by itself.
■
Never turn the player off or on
manually during the update process.
■
Samsung Electronics takes no legal
responsibility for player malfunction
caused by an unstable Internet
connection or consumer negligence
during software upgrade.
Contact Samsung
Provides contact information for assistance
with your player.
Terms of Service Agreement
Lets you view the general disclaimer
regarding third party contents and
services.
Reset
Returns all settings to their factory defaults
except for the network settings.