Samsung BD-HM57C-ZA - Manual (Page 14)

14
Ğ Wireless - Automatic
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then
press the v button.
4. Select Wireless in the Network Settings
screen, and then press the v button.
The player searches for and then
displays a list of the available networks.
m Move " Select ' Return
Network Settings
Select your network type.
Network type Wireless
Wireless network
Add Network you can connect your
Blu-ray player to the
internet. please select
which wireless network
to use.
WpS(pBC) Search
5. Select the desired network, and then
press the v button.
6. On the Security screen, enter your
network's Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with an arrow
button, and then pressing v button.
7. When finished, select done and then
press the v button. The player verifies
the network connection and then
connects to the network.
8. When verification is complete, select
OK, and then press the v button.
✎ NOTES
■
You should be able to find the
Security Code or Pass Phrase on one
of the set up screens you used to
set up your router or modem.
10. On the Security screen, enter your
network's Security Code or Pass
Phrase. Enter numbers directly using
the number buttons on your remote
control. Enter letters by selecting a
letter with the ▲▼◀▶ buttons, and
then pressing the v button.
11. When finished, select done at the right
of the screen, and then press the v
button.
The player verifies the network
connection and then connects to the
network.
12. After the player verifies the network,
select OK, and then press the v button.
Ğ WpS(pBC)
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then
press the v button.
4. Select Wireless in the Network Settings
screen, and then press the v button.
5. Press the ▲▼ button on your remote,
and then press the ◀▶ button to
select the WpS(pBC).
6. Press the v button on your remote.
The "Press the PBC button" message
appears.
7. Press the WPS(PBC) button on your
router within two minutes. Your player
automatically acquires all the network
settings values it needs and connects
to your network.
The Network Status screen appears.
The player connects to the network
after the network connection is
verified.
Ğ WpS(pIN)
Before you begin, open the router's setup
menu on your PC and access the screen
with the WPS PIN entry field.
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then
press the v button.
4. Select Wireless in the Network Settings
screen, and then press the v button.
The player searches for and then
displays a list of the available networks.
5. Select the desired network, and then
press the ▶ button.
6. Select the WpS(pIN), and then press
the
v button. The PIN pop-up appears.
7. Enter the PIN into the WPS PIN entry
field in the router's Set Up screen and
then save the the screen.
✎ NOTES
■
Contact the manufacturer of the
router for instructions explaining
how to access the router's Set Up
screens or refer to the router's
user's manual.
■
For WPS connection, set your
wireless router’s security encryption
to AES. WPS does not support WEP
security encryption.
Network Test
Use this menu item to check whether your
network connection is working or not.
Ğ Wireless - Manual
If you have a static IP address or the
Automatic procedure does not work, you'll
need to set the Network Settings values
manually.
1. Follow the directions in Wireless -
Automatic through Step 5.
2. The player searches for a network, and
then displays the connection failed
message.
3. On the bottom of the screen, select Ip
Settings, and then press the v button.
The IP Settings screen appears.
4. Select the IP Setting field, and then
press the v button.
5. Select Enter manually in the IP Setting
field, and then press the v button.
6. Select a value to enter (Ip Address, for
example), and then press v button.
Use the number keypad on your remote
control to enter the numbers for the
value. Use the◀▶ buttons on the
remote control to move from entry
field to entry field within a value. When
done with one value, press the v
button.
7. Press the ▲ or ▼ button to move to
another value, and then enter the
numbers for that value following the
instructions in Step 6.
8. Repeat Steps 6 and 7 until you have
filled in all values.
✎ NOTES
■
You can get the Network values
from your Internet provider.
9. When finished, and then press the
RETURN or EXIT button. The Security
Screen appears.