Samsung BD-HM57C-ZA - Manual (Page 10)

10
Settings
The Initial Settings Procedure
●
The Home screen will not appear if you
do not configure the initial settings.
●
The OSD (On Screen Display) may
change in this player after you upgrade
the software version.
●
The access steps may differ depending
on the menu you selected.
●
After the initial settings process is
complete, you can then operate the
panel buttons and remote control.
After you have connected the player to
your TV, turn on the TV and player. When
you turn on the player the first time, the
player's Initial Settings screen appears on
the TV. The Initial Setting procedure lets you
set the On Screen Display (OSD) and menu
languages, the aspect ratio (screen size),
the network type, and connect the player
to your network.
To run the Initial Settings procedure, follow
these steps:
1. Plug in the Blu-ray player, turn on your
TV, and then turn on the Blu-ray player
by pressing the pOWER button on the
remote. The Initial Settings Language
screen appears.
> Move " Select
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
Български
Hrvatski
dansk
Nederlands
English
2. Select the desired language, and then press
the v button. The Start screen appears.
a previous " Select
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
Start
3. Press the v button. The TV Aspect
screen appears.
4. On the TV Aspect screen, select the desired
TV Aspect Ratio, and then press the v
button. The Network screen appears.
✎ NOTES
■
An explanation of each Aspect Ratio
appears on the screen. Highlight each
choice to see each explanation. If
you have an HDTV, we suggest you
choose 16:9 original.
5. If you have connected a LAN cable to the
Blu-ray player, Initial Setup defaults to Wired
Network. Go to Wired Network on the right
side of the page. If you have not connected
a LAN cable, Initial Setup defaults to
Wireless Network. Go to Wireless Network
on the right side of the page.
✎ NOTES
■
If you have no network, select Skip
by pressing the BLUE (d) button, and
then go to Step 6.
6. The Initial Settings Complete window
appears and remains on the screen
for a few moments. Then, the Home
screen appears.
Wired Network
1. The Blu-ray player automatically verifies
your wired network.
a previous d Skip m Move " Select
Initial Settings I Network
Select your network type.
Network type Wired
Network cable connected.
Connect
2. After the player verifies the network,
press the v button.
3. Go to Step 6 on the left side of the
page.
Wireless Network
1. The Blu-ray player automatically
searches for and then lists all wireless
networks that are within range.
a previous d Skip m Move " Select
Initial Settings I Network
Select your network type.
Network type Wireless
Wireless network
Add Network you can connect your
Blu-ray player to the
internet. please select
which wireless network
to use.
WpS(pBC) Search
2. Select a network, and then press the v
button. The keyboard appears.
a previous d Skip m Move " Select
Initial Settings I Network
linksys3
solugen_edu#2
iptime23
solugen_edu#1
WpS(pBC) Refresh
Enter security key. 0 / 64
Caps 1 2 3 4 5 6 7 8 9 0  Clear
q w e r t y u i o p ^ * 
123#& a s d f g h j k l ~ @ ! done
z x c v b n m , . ? - ▲ Cancel
ENG .com ◀ ▶ ▼
" Select ' Return
Security Key
3. If your network has a password, use the
keyboard to enter it. Press the number
buttons on your remote to enter numbers.
Use the keyboard to enter letters. If you
want to display the password as you enter
it, select Show Password on the right. When
finished, use the ▲▼◀▶ buttons to select
Done, and then press the v button. If you
have no password, go to Step 4.
4. After the player verifies the network,
press the v button.
5. Go to Step 6 on the left side of the page.
✎ NOTES
■
The Home screen will not appear if you
do not configure the initial settings except
as noted below.
■
If you press the BLUE (d) button during
network setup, you can access the
Home screen even if the network setup
is not completed yet.
■
When you return to the Home screen, the
full screen mode is cancelled automatically.
■
If you want to display the Initial Setting
screen again to make changes, press the ■
button on the front panel of the player for
more than 5 seconds with no disc inserted.
This resets the player to its default settings.
■
After the initial settings process is complete.
you can operate the HDMI-CEC function.
■
If you want to use the Anynet+(HDMI-CEC)
function to aid in the initial set up process,
please follow the instructions below.
1) Connect the player to an Anynet+(HDMI-
CEC) compliant Samsung TV using HDMI Cable.