Samsung SC-D103-XAP - Manual (Page 85)

✤ File numbers will be given to images in order of recording when
still images are stored on the Memory Card.
✤ MEMORY FILE NUMBERS may be set as follows:
■ SERIES: When there are existing files, the new image will be
named as the next number in the sequence.
■ RESET
-
When there are no files stored on the Memory Card: The
file numbering starts from 0001
- When there are files stored on the Memory Card: File
numbering will continue after the last file's number
1. Set the mode switch to MEMORY CARD and the
power Switch to the CAMERA mode.
2. Press the MENU button.
■ The menu list will appear.
3. Turn the MENU DIAL to highlight MEMORY and
press the ENTER button.
4. Turn the MENU DIAL to activate the FILE NO. and
press the ENTER button.
5. To exit, press the MENU button.
Notes
■ When using a Memory Card that contains image files from another
device, numbering the file will begin after the largest number that is
memorized whether in the camera or the the Memory Card.
■ Numbering the file starts from 0001 again when 9999 files have
been saved.
✤
✤
■
■
■
■
■
Digital Still Camera mode
MEMORY FILE NUMBER (SCD103/D105 only)
ENGLISH
85 85
M.REC MODE
INITIAL
PRINT MARK
PROTECT
M.PLAY SELECT
FILE NO.
DELETE
FORMAT
PHOTO QUALITY
MPEG4 SIZE
CAMERA
A/V
MEMORY
VIEWER
M.REC MODE
MEMORY SET
PRINT MARK
PROTECT
M.PLAY SELECT
FILE NO.
DELETE
FORMAT
PHOTO QUALITY
MPEG4 SIZE
PHOTO
SF
320X240
000
SERIES