Samsung SC-D103-XAP - Manual (Page 68)

ENGLISH
68 68
Advanced Recording
✤ VIDEO LIGHT works in CAMERA/M.REC mode only.
✤ Brightens the scene when natural lighting is too dim.
✤ The VIDEO LIGHT works in SP mode only.
- If you turn on the LIGHT in LP mode, the LIGHT indicator and
“LP” will blink on the LCD.
DANGER
■ The VIDEO LIGHT can become extremely hot.
Do not touch it while in operation or soon after turning it off,
otherwise serious injury may result.
■ Do not place the camcorder into the carrying case immediately
after using the VIDEO LIGHT, since it remains extremely hot for
some time.
■ Do not use near flammable or explosive materials.
■ It is recommended that you consult your nearest SAMSUNG
dealer for bulb replacement.
-
The life of the bulb is approximately 50 hours.
1. Set the camcorder to the CAMERA mode.
2. Press the V.LIGHT button.
■ The VIDEO LIGHT indicator appears
on the LCD and the light is turned on.
3. If you want to turn off the VIDEO LIGHT,
press the V.LIGHT button again.
Notes
■ The light is turned off automatically during ejecting or inserting.
■ Even if the battery indicator does not blink when the battery pack's
charge is low, the camcorder may turn off automatically when you
turn on the light, or when you start recording with the light turned on.
■ The built-in light is used as a subsidiary light, it may not be enough
for outdoor lighting.
■ The picture quality may deteriorate if you use the VIDEO LIGHT
continuously for more than 20 minutes.
Using the VIDEO LIGHT (SCD103/D105 only)
✤
✤
✤
■
■
■
■
■
■
■
■
■
V.LIGHT