Samsung SC-D103-XAP - Manual (Page 59)

59 59
ENGLISH
Advanced Recording
✤ The EASY mode allows a beginner to easily make good
recordings.
■ The EASY mode only operates in CAMERA mode.
1. Set the power switch to CAMERA mode.
2. By pressing the EASY button, all functions on the
camera will be set to off and the recording settings
will be set to the following basic modes:
■ Battery level, recording mode, counter,
DATE/TIME, and DIS (
) will be displayed.
■ The word “EASY.Q” will appear on the LCD at
the same time.
However, the DATE/TIME will only be seen if it
has been previously set. (see page 53)
3. Press START/STOP to start recording.
■ Recording will begin using the basic automatic
settings.
4. Press the EASY button again in the STBY mode and
then turn the EASY mode off.
■ The EASY function will not turn off while you are recording.
■ The camera will return to the settings that were set prior to
activating EASY mode.
Notes
■ In EASY mode, certain functions are not available, such as MENU,
BLC, AF/MF.
-
If you want to use these functions, you must first switch the
EASY mode off.
■ The EASY mode settings are deleted when the battery pack is
uninstalled from the camcorder and therefore, they must be reset
when a battery pack has been replaced.
EASY Mode (for Beginners)
✤
■
■
■
■
■
■
■
■
0 : 0 0 : 0 0
STBY
EASY
5 5 min
1 2 : 0 0 A M
J A N . 1 0 , 2 0 0 4
EASY