Samsung SC-D103-XAP - Manual (Page 41)

Advanced Recording
41 41
ENGLISH
● DEMONSTRATION
✤ Demonstration automatically shows you the major functions
that are included with your camcorder so that you may use
them more easily.
✤ The DEMONSTRATION function may only be used in the
CAMERA mode without a tape inserted in the camcorder.
✤ The demonstration operates repeatedly until the
DEMONSTRATION mode switched OFF.
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
■ The menu list will appear.
3. Turn the MENU DIAL to highlight INITIAL and
press the ENTER button.
4. Select DEMONSTRATION from the submenu and
press the ENTER button.
5. To activate the DEMONSTRATION,
set DEMONSTRATION ON.
■ Press the MENU button to quit the menu.
■ The demonstration will begin.
6. To end the DEMONSTRATION,
set the DEMONSTRATION to OFF.
Notes
■ The DEMONSTRATION function only works without a
TAPE inserted.
■ The DEMONSTRATION mode is automatically activated when
the camcorder is left idle for more than 10 minutes after switching
to the CAMERA mode (no tape is inserted in the camcorder).
■ If you press other buttons (FADE, BLC, PHOTO, EASY) during
the DEMONSTRATION mode, the DEMONSTRATION stops
temporarily and resumes 10 minutes later if you do not operate
any other functions.
■ While setting the NITE PIX to ON, the DEMONSTRATION function
does not work.
●
✤
✤
✤
■
■
■
■
■
■
■
CAM MODE
INITIAL CLOCK SET
WL. REMOTE
LANGUAGE
DEMO
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
DEMONSTRATION
LANGUAGE ENGLISH