Samsung SCH-I730ZKVXAR - Manual (Page 170)

170
Se
ct
io
n 1
3
Beam
Your i730 can receive and transmit files using its built-in
infrared (IR) port. However, you must set your i730 to
accept incoming beams before receiving files.
Note: You cannot receive incoming IR beams unless you set your i730 to
accept all incoming beams.
Accepting Incoming Beams
To set your i730 to accept all incoming IR beams, follow
these steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Connections tab.
4. Tap the Beam icon.
5. Check the box next to “Receive all incoming beams.”
6. To exit and save, tap .
Sending a Beam
You can beam contacts, documents, tasks, workbooks,
and even pictures to other devices that are IR capable. To
send an IR beam to another device, you must align the IR
ports of both devices, and then select “Beam” from the
appropriate menu. See the appropriate sections that
follow for specific details on beaming files to another
device.