Samsung SCH-U410MSAVZW - Manual (Page 92)

89
8. Highlight one of the following and press to select:
• Incoming Messages: Select Allow All or Block All.
• Outgoing Messages: Select Allow All or Block All.
Edit Lock Codes
The default lock codes are the last four digits of your phone number. The Edit Code
function allows you to change the Phone Lock Code or the Calls & Services Code to
the code of your preference.
1. From the main screen, press MENU, use the right navigation key to
highlight Settings & Tools.
2. Press Phone Settings.
3. Press Security. You’re prompted to enter the Phone Lock Code. The
default Phone Lock Code is the last four digits of your telephone number.
4. Enter the Phone Lock Code. The Security menu appears.
5. Press Edit Codes. The following options display:
• Phone Only: Allows you to edit the Phone Lock Code for only the handset.
• Calls & Services: Allows you to edit the Phone Lock Code for all Calls &
Services.
6. Highlight an option and press . If you selected Calls and Services, you
are prompted to "ENTER CURRENT CODE". Enter the current Calls &
Services Code, and press
.
7. At the “ENTER NEW CODE” prompt, enter the new Phone Lock Code and
press .
8. You’re prompted to confirm the new Phone Lock Code.
9. At the “CONFIRM LOCK CODE” prompt, re-enter lock code and press .
10. “PHONE ONLY CODE SET” or “CALLS & SERVICE CODE SET” message
appears in the display confirming that your lock code was changed.
Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the
lock code, be sure to write down or memorize the new code.
u410.book Page 89 Thursday, June 14, 2007 6:19 PM