Samsung NP270E5J-K01US - Manual (Page 63)

62
Chapter 3.
Using the computer
4
Select Internet Protocol Version 4(TCP/IPv4) from the list
of Network Components and click Properties.
The Network Component name may differ depending on •
the Operating System Installed.
To add a network component, click Install in the screen
•
shown in the figure above. You can add clients, services,
and protocols.
5
Configure the IP settings.
When using DHCP, select Obtain an IP address
automatically. To use a static IP address, select Use the
following IP address, and set the IP address manually.
When not using DHCP, ask your network administrator for the
IP address.
6
When you have completed the settings, click the OK button.
The network settings have been completed.
Wired Network