Samsung SC-X300L-XAA - Manual (Page 4)

IMPORTANT SAFETY INSTRUCTIONS
21. POWER LINES:
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits where
it can fall into such power lines or circuits. When installing an out-
side antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be
fatal.
22. OVERLOADING:
Do not overload wall outlets and extension cords as this can result
in a risk of fire or electric shock.
23. OBJECTS AND LIQUIDS:
Never push objects of any kind into this CAMCORDER through
openings as they may touch dangerous voltage points or short out a
part that could result in a fire or electric shock.
Never spill liquids of any kind onto the CAMCORDER. Should spilla-
ge occur, unplug unit and have it checked by a technician before
use.
24. SERVICING:
Do not attempt to service this CAMCORDER yourself. Opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
25. DAMAGE REQUIRING SERVICE:
Unplug this CAMCORDER from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If any liquid has been spilled onto, or objects have fallen into the
CAMCORDER.
c. If the CAMCORDER has been exposed to rain or water.
d. If the CAMCORDER does not operate normally by following the
operating instructions, adjust only those controls that are cove-
red by the operating instructions. Improper adjustment of other
controls may result in damage and will often require extensive
work by a qualified technician to restore the CAMCORDER to
its normal operation.
e. If the CAMCORDER has been dropped or the cabinet has been
damaged.
f. When the CAMCORDER exhibits a distinct change in perfor-
mance, this indicates a need for service.
26. REPLACEMENT PARTS:
When replacement parts are required, be sure the service techni-
cian has used replacement parts specified by the manufacturer and
having the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other
hazards.
27. SAFETY CHECK:
Upon completion of any service or repairs to this CAMCORDER,
ask the service technician to perform safety checks to determine
that the CAMCORDER is in safe operating order.
ENGLISH
사본 - US_Safety.indd 3 2007-01-24 오후 2:15:46