Samsung UN32D4000NDXZA - Manual (Page 21)

◀ ▶
English
❑
■
Auto❑Program❑
Scans for channels automatically and stores them in the TV’s memory.
To start
Auto❑Program , follow these steps:
1. Push MENUm → Channel → ENTERE on your remote control.
2. Select Auto❑Program , and then press ENTERE.
3. Select Air or Cable or both by highlighting and then pressing ENTERE.
N If you selected Air or Cable or both on the Antenna screen, your choice
will already be selected.
4. Select Search or Next , and then press ENTERE.
5. If you selected Cable , the Cable System screen appears. Select Digital❑
Cable❑System , and then press ENTERE.
N If you selected Air only, Auto❑Program starts.