Switching❑between❑anynet+❑devices – Samsung UN32D4000NDXZA User Manual
Page 167
◀
▶
English
❑
❑
Switching❑between❑Anynet+❑Devices❑
1.
Press the TOOLS button, select
Anynet+❑(HDMI-CEC)
, and then press
ENTERE
2.
Select
Device❑List
, and then press the ENTERE●button.
N
If you cannot find a device you want, press the
A
C
B
D
button to refresh the list.
3.
Select a device, and then press the ENTERE button. You can switch to the
selected device.
N
The
Device❑List
menu appears only when you set
Anynet+❑(HDMI-CEC)❑
to
On
in the
System
menu.
●
Switching to the selected device may take up to 2 minutes. You
cannot cancel the operation during the switching operation.
●
If you have selected an Anynet+ device by pressing the SOURCE button
and then selecting its input source, you cannot use the Anynet+ function.
You must select and switch to an Anynet+ device by using the
Device❑
List
for Anynet+ to work.