Samsung UN32D4000NDXZA - Manual (Page 172)

◀ ▶
English
Problem Possible❑Solution
I want to start
Anynet+.
●
Check if the Anynet+ device is properly connected to the TV
and check if the
❑Anynet+❑(HDMI-CEC) is set to On in the
System menu.
●
Press the TOOLS button to display the Anynet+ menu and
select a menu you want.
I want to exit
Anynet+.
●
Select View❑TV in the Anynet+ menu.
●
Press the SOURCE button on the TV remote control and select
a device other than an Anynet+ device.
●
Press >❑CH❑< to change the TV mode. (Note that the
channel button operates only when a tuner-embedded Anynet+
device is not connected.)