Samsung ML-1450-XAX - Manual (Page 124)

7.17 P
ROBLEM
S
OLVING
Problem Solution
Solving Print Quality Problems
• The paper may not meet paper specifications (for example,
the paper is too moist or too rough). See “Paper
Specifications” on
page A.2 .
• The transfer roller may be dirty. See “Cleaning the Inside”
on page 6.4 .
• The paper path may need cleaning. See “Cleaning the
Inside”on page 6.4 .
Toner specks
If faded areas, generally rounded, occur randomly on the
page:
• A single sheet of paper may be defective. Try reprinting the
job.
• The moisture content of the paper is uneven or the paper
has moist spots on its surface. Try a different kind or brand
of paper. See “Paper Specifications” on
page A.2 .
• The paper lot is bad. The manufacturing processes can
cause some areas to reject toner. Try a different kind or
brand of paper.
• The toner cartridge may be defective. See Repetitive vertical
defects” on page 7.18 .
• If these steps do not correct the problems, contact a
service representative.
Dropouts
If black vertical streaks appear on the page:
• The photosensitive drum inside the toner cartridge has
probably been scratched. Install a new toner cartridge.
If white vertical streaks appear on the page:
• The surface of the LSU part inside the printer may be dirty.
Clean the LSU (see page 6.5 ).
Vertical lines
Aa Bb Cc
Aa Bb Cc
Aa Bb Cc
Aa Bb Cc
Aa Bb Cc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc AaBbCc
AaBbCc
AaBbCc