Samsung NP940X5J-K01US - Manual (Page 94)

Troubleshooting
94
Copying the hard drive
(making a disk image)
To replace the hard drive, move the data to the new drive by
making a disk image. The new drive must be large enough to hold
the data from the current drive.
Purchase an external hard drive connector separately to connect
the new drive to the computer.
1
Connect the new drive to the computer with an external hard
drive connector.
2
On the Start screen, click at the lower-left edge, and select
Recovery.
3
Select Disk copy.
4
Select a point to recover → Recover.
• Select one of your backup points.
• If a backup data is stored on an internal drive, select
→ the drive.
Backup
point
5
Follow the on-screen instructions to complete data recovery.