Samsung HMX-H105BN-XAA - Manual (Page 140)

126_ English
Storage Media
Symptom Explanation/Solution
Memory card functions are not operable.
• Insert a memory card into your camcorder properly. page 28
• If you use a memory card formatted on a computer, format it again directly on your
camcorder. page 82
Image cannot be deleted.
• Release the lock on the write-protect tab of the memory card, if any. page 30
• You cannot move or delete the protected images. Release the protection of the
image on the device. page 99
You cannot format the memory card.
• Release the lock on the write-protect tab of the memory card, if any. page 30
• The memory card is not supported on your camcorder or the card has some
problems.
The data file name is not indicated
correctly.
• The file may be corrupted.
• The file format is not supported by your HD camcorder.
• Only the file name is displayed if the directory structure complies with the
international standard.
Adjusting the image during recording
Symptom Explanation/Solution
Focus does not adjust automatically.
• Set “Focus” to “Auto.” page 69
• The recording conditions are not suitable for auto focus.
Adjust the focus manually. page 69
• The lens is dusty on the surface. Clear the lens and check the focus.
• Recording is being made in a dark location.
Use a light to brighten the area.
The image appears too bright or flickering,
or changes in color.
• This may occur when you make a recording under a fluorescent sodium or mercury
lamp. Cancel “iSCENE” to avoid or minimize this phenomenon.
page 59
Image’s color balance is not natural.
• White balance adjustment is required. Adjust to the proper “White Balance.”
page 62
The subject may appear bent when
passing through the frame quickly.
• This is called the focal plane phenomenon. This is not a malfunction. Because
of the way the image device (CMOS sensor) reads out video signals, the subject
passing by the frame rapidly may appear to bend, depending on the recording
condition.