Samsung EC-L700ZSBB-FR - Manual (Page 61)

《60》
Before contacting a service centre
■ Please check the following
The camera doesn’t switch on
•There is low battery capacity
→ Insert fresh batteries. (p.10)
•The battery may be inserted incorrectly.
→ Insert the battery according to the polarity marks (+, -)
•The battery is not inserted
→ Insert the battery and turn on the camera
The camera power ceases while in use
•The battery are exhausted
→ Insert charged battery
•The Camera is turned off automatically
→ Turn on the camera power again.
Battery power quickly drains
•The Camera is being used in low temperatures
→ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only
remove it in order to take images
Camera does not take images when pressing the Shutter button
•There is insufficient memory capacity
→ Delete unnecessary image files
•The memory card has not been formatted
→ Format the memory card (p.54)
•The memory card is exhausted
→ Insert a new memory card
•The memory card is locked
→ Refer to [Card Locked!] error message
•The camera’s power is off
→ Turn the camera power on
•The battery is exhausted
→ Insert fresh batteries.
•Battery is inserted incorrectly with the polarities reversed
→ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
•The camera stopped due to a malfunction
→ Remove /re-insert battery and switch the camera on
The images are unclear
•A picture was taken without setting an appropriate macro mode
→ Select an appropriate macro mode to take a clear image.
•The picture was taken with the subject beyond the flash range
→ Take a picture within the flash range
•The lens is smudged or dirty
→ Clean the lens
The flash does not fire
•Flash off mode has been selected
→ Dis-engage flash off mode
•The camera mode can’t use the flash
→ Refer to the FLASH instruction (p.22~24)
Incorrect date and time is displayed
•The date and time have been set incorrectly or the camera has adopted the
default settings
→ Reset the date and time correctly
The camera buttons do not operate
•Camera malfunction
→ Remove / re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
•Incorrect memory card format
→ Re-format the memory card