Samsung EC-L700ZSBB-FR - Manual (Page 11)

《10》
Connecting to a Power Source
■ Insert the battery as shown
- If the camera does not turn on after you
have inserted battery, please check
whether the battery is inserted with the
correct polarity (+ / -).
- When the battery chamber cover is
opened, do not press the battery
chamber cover by force. This may cause
damage to the battery chamber cover.
Battery
status
Battery
indicator
The battery is
fully charged
Low battery
capacity
(Prepare to
recharge or use
spare battery)
Low battery
capacity
(Prepare to
recharge or use
spare battery)
Low battery
capacity
(Prepare to
recharge or use
spare battery)
■ There are 4 indicators for battery condition that are displayed on the LCD
monitor.
■ Insert the memory card as shown.
- Turn off the camera’s power before
inserting the memory card.
- Have the front of the memory card
facing toward the front of the camera
(lens) and the card pins toward the
back of the camera (LCD monitor).
- Do not insert the memory card in the
wrong way round. Doing so may
damage the memory card slot.
Inserting the memory card