beautypg.com

5 expansion slots, 1 installing an expansion card, 2 configuring an expansion card – Asus E3746 User Manual

Page 48: Expansion slots -22 2.5.1, Installing an expansion card -22, Configuring an expansion card -22

background image

2-22

Chapter 2: Hardware information

2.5

Expansion slots

In the future, you may need to install expansion cards. The following sub-sections

describe the slots and the expansion cards that they support.

2.5.1

Installing an expansion card

To install an expansion card:
1. Before installing the expansion card, read the documentation that came with

it and make the necessary hardware settings for the card.

2. Remove the system unit cover (if your motherboard is already installed in a

chassis).

3. Remove the bracket opposite the slot that you intend to use. Keep the screw

for later use.

4. Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

5. Secure the card to the chassis with the screw you removed earlier.
6. Replace the system cover.

2.5.2

Configuring an expansion card

After installing the expansion card, configure it by adjusting the software settings.
1. Turn on the system and change the necessary BIOS settings, if any. See

Chapter 4 for information on BIOS setup.

2. Assign an IRQ to the card. Refer to the tables on the next page.
3. Install the software drivers for the expansion card.

Make sure to unplug the power cord before adding or removing expansion

cards. Failure to do so may cause you physical injury and damage motherboard

components.

When using PCI cards on shared slots, ensure that the drivers support “Share

IR�” or that the cards do not need IR� assignments. Otherwise, conflicts will

arise between the two PCI groups, making the system unstable and the card

inoperable. Refer to the table on the next page for details.

This manual is related to the following products: