Asus E3746 - Manual (Page 104)

4-26 Chapter 4: BIOS setup
4.5.2 PCIPnP
Plug & Play O/S [No]
When set to [No], the BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Primary Display Adapter [PCI]
Allows you to select the graphics controller to use as the primary boot device.
Configuration options: [PCI] [PCI-E]
Select Menu
Item Specific Help
Select Yes if you are
using a Plug and Play
capable operating
system. Select No if
you need the BIOS to
configure non-boot
devices.
Phoenix-AwardBIOS CMOS Setup Utility
Advanced
PCIPnP
Plug & Play O/S [No]
Primary Display Adapter [PCI]
4.5.3 Onboard Device Configuration
Select Menu
Item Specific Help
Press [Enter] to
setHD Audio function.
Phoenix-AwardBIOS CMOS Setup Utility
Advanced
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Onboard Device Configuration
HD Audio [Auto]
Front Panel Support Type [HD Audio]
Onboard 1st nVidia LAN [Enabled]
Onboard 2nd nVidia LAN [Enabled]
JMicron RAID controller [IDE]
Onboard LAN Boot ROM [Disabled]
Onboard 1394 [Enabled]
HD Audio [Auto]
Allows you to disable or set the High-Definition audio function.
Configuration options: [Auto] [Disabled]