AMX ViewStat - Manual (Page 60)

Using the NetLinx Module to Program the ViewStat
54 ViewStat Communicating Thermostat
String Feedback (Cont.)
String Description
'T- HUMIDIFY-val>' Reports current humidify set point.
Parameters:
: id of thermostat/zone
: 0-97 = humidify point (in percent)
Example:
'T-6 HUMIDIFY-30'
'T- ID-' Reports identification number of thermostat.
'T- LOCK-' Reports current thermostat lock state.
Parameters:
• : id of thermostat/zone
• :
ON = thermostat is locked
OFF = thermostat is unlocked
Example:
'T-2 LOCK-ON'
'T- MENU-' Reports Menu state, ON/OFF.
'T- MODE-' Reports current HVAC mode.
Parameters:
• : id of thermostat/zone
• :
OFF = disabled (no cool, no heat)
HEAT = heat mode (no cool)
COOL = cool mode (no heat)
AUTO = thermostat automatically controls heat and cool
based on set points.
Example:
'T-6 MODE-AUTO'
'T- OUTHUM-' Query for current outside humidity.
Parameters:
• : id of thermostat/zone
• : 0..100 = humidity level (%)
Example:
'T-8 OUTHUM-68'
'T- OUTTEMP-' Reports current outside temperature.
Parameters:
• : id of thermostat/zone
• : current outside temperature
Example:
'T-2 OUTTEMP-84'
'T- PMES-' Reports scrolling message.
Parameters:
• : message 1-4
• : data that message happens to be