AMX ViewStat - Manual (Page 46)

Set Up and Configuration
40 ViewStat Communicating Thermostat
Network Override Set-Up
This enables or disables the Network Override feature. When Network Override has been invoked the
thermostat will only respond to the buttons of the thermostat; commands sent by the automation system are
ignored.
Pressing the Enter button activates Network Override. However, you can disable this feature if you don’t want
users to be able to activate Network Override. Enabling and Disabling of this feature is done through
Thermostat Set-Up (FIG. 33).
Thermostat Button Lockout
This feature partially or completely disables the buttons of the thermostat. For example, the MODE and FAN
status can be set and then locked, so the buttons will not allow those settings to be changed. Additionally, this
can be set to allow changes for a limited time and amount of change. For example, you can limit temperature
changes to ±3°, if desired (FIG. 34).
FIG. 33 Network Override set-up
FIG. 34 Thermostat Button Lockout
Network Override
Set Up Next
Enable Network
Override Next
Disable Network
Override Back
Net.Ovrd.Enabled
EXIT
Net.Ovrd.Disable
EXIT
MAIN MENU
MAIN MENU
Thermostat
Lockout More
EXIT
Back
Complete
Lockout Next
Partial
Lockout More
Unlock
Thermostat More
EXIT
Back
SetPoints, Fan &
Mode Locked Out
Set Time Limit
min.
Set Temp. Limit
+
-
Allow SetPoint
Changes? Timed
Allow Fan
Changes? Yes
Allow Mode
Changes? Yes
Time Val
Yes
No
+
-
Timed
No
Timed
No