Campbell Scientific RF450 Spread Spectrum Radio - Manual (Page 40)

Appendix B. Settings Editor
Radios deployed outside of the United States must use a Hop Table Version
other than zero (the default). This setting can be changed through the Settings
Editor tab.
The Hop Table Version setting allows the user to choose the portion of the
band in which the transceiver will operate.
0 Standard Full 902-928 MHz
1 Australia 915-928 MHz
2 International 902-928 MHz, 16 fewer frequencies than full U.S. set
3 Taiwan 916-920 MHz
4 New Zealand 921-928 MHz
5 Notch Uses 902-928 MHz with center frequencies of 911-919
MHz notched out
6 Brazil 902-915 MHz
B-2