Campbell Scientific RF450 Spread Spectrum Radio - Manual (Page 12)

RF450 Spread Spectrum Radio
FIGURE 3.4-2. DevConfig Screen Showing the RF450 Settings
Deployment, Settings Editor, Terminal, and Send OS tabs are available. The
Deployment tab contains all the standard parameters that need to be set for a
PakBus network. The Settings Editor or Terminal tabs may be used to access
all of the FreeWave Radio settings. They should be used by experienced
FreeWave Radio users only. New operating systems for the CSI board are
loaded through the Send OS tab.
The Device Configuration Utility makes applying the same settings to multiple
devices easy. Once settings are configured for one device, click the Apply
button; a summary screen similar to Figure 3.4-3 will show. Click the Save
button to save a configuration file. This file can then be used to load the
settings into another RF450. Click the Read File button to load the settings in
DevConfig then the Apply button to load the settings into the RF450.
6