Campbell Scientific CS500-L Temperature and Relative Humidity Probe - Manual (Page 7)

CS500 Temperature and Relative Humidity Probe
3
The CS500 is held in place, within the 41003 or UT12VA Radiation Shield, via
an adapter, Model 41381. The 41381 adapter is threaded onto the bottom of
the CS500 (Figure 4). The 41004 12-Plate Radiation Shield, used with 207
probes, can be converted to a 41002 with P/N 6638.
The black outer jacket of the cable is Santoprene ® rubber. This
compound was chosen for its resistance to temperature extremes,
moisture, and UV degradation. However, this jacket will support
combustion in air. It is rated as slow burning when tested
according to U.L. 94 H.B. and will pass FMVSS302. Local fire
codes may preclude its use inside buildings.
FIGURE 1. CS500 and 41301 Radiation Shield
on a CM6/CM10 Tripod Mast
NOTE